Values below come from the supplied range information. A reference configuration is not a confirmed order specification. Ask us to verify the exact model, interfaces and operating conditions.
Range illustration. Exact model appearance and configuration may differ.
01 / 2
WAVE-300P-8
Parameters
Model
WAVE-300P-8
Dimensions
Model-specific; confirm the current datasheet.
Flow
Model-specific; confirm the current datasheet.
Pressure
Interface / pressure confirmation: Match end-cap, seal, thread and pressure class to vessel datasheet
Application
End-cap assemblies, seals and connections for maintaining compatible RO membrane housings. Interfaces must be checked against the vessel drawing.
Accessories
Matching seals, pressure plates, retaining rings and fasteners are confirmed against the assembly drawing.Contact us for more information ↗
Additional model parameters
Element format
8 in / 8040
Interface / pressure confirmation
Match end-cap, seal, thread and pressure class to vessel datasheet
Replacement and connection parts that help bring membrane elements and system interfaces together.
Key Advantages & Selection Notes
End caps and adapters are shown in the supplied product sheets
Check element series, dimensions, seal type and port connection before ordering
Please share a photo or model number if you are replacing an existing part
Model Comparison & Technical Data
RO End Caps & Adapters · reference table 1
Reference model
Element format
Interface / pressure confirmation
WAVE-300P-8
8 in / 8040
Match end-cap, seal, thread and pressure class to vessel datasheet
WAVE-300PJ-8
8 in / 8040
Separate model; do not assume interchangeability
RO End Caps & Adapters · reference table 2
Part
Selection details
End-cap assembly
Pressure plate, sealing plate, adapter, seals and retaining components confirmed by assembly drawing
Adapter
Example total length 175.5–177 mm; confirm exact drawing and vessel
O-rings and seals
Confirm compound, ID, OD and cross-section
Securing bolts / retaining rings
Confirm material, thread, geometry and quantity
Specifications are subject to confirmation for the exact model. Test conditions, units, dimensions, materials, packing, performance and certificates must be checked against the current datasheet. “To be confirmed” and “not provided” are not performance commitments.
Typical Applications
End-cap assemblies, seals and connections for maintaining compatible RO membrane housings. Interfaces must be checked against the vessel drawing.
✓Full model number, label and photographs
✓Measured length, diameter, end-cap style and connection standard
✓Material, operating conditions, quantity and destination
For replacement parts, confirm the full model, measured dimensions, materials, seals and operating limits before assuming compatibility.
CUSTOMER PERSPECTIVES
Experience shared by our customers.
System Integrator
⭐️⭐️⭐️⭐️⭐️
“We needed replacement components for an existing RO system. Their team checked dimensions and connection specifications before shipment, which saved us considerable installation time.
Better alignment between design, components and site requirements.
System Integrator | Middle East
LET’S KEEP IN TOUCH
We’re here to listen.
A question, a photograph or a complete BOM. Start wherever you are; we will work through the next details together.
